Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
1988 Ford F-150. fuel pumps won't come on
Forum Index -> Off Topic Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
BugMan114
Samba Member


Joined: March 22, 2007
Posts: 3744
Location: Ellenwood, GA
BugMan114 is offline 

PostPosted: Tue Feb 28, 2012 8:03 pm    Post subject: 1988 Ford F-150. fuel pumps won't come on Reply with quote

howdy yall. i've tried everything i can do, even on the ford forums, but no help yet, so i figured, why not try here.

so anyhoo, I have an 88' f-150 super cab (2 door with the tiny backseat), 302 5 speed manual and i can't get the fuel pumps to come on. first a little background:

i bought it about 5 years ago. when i got it, it didn't run. The PO had taken all of the wires off the solenoid for some reason. so after wiring it all back up, it still wouldn't start. we took a crap shoot in the dark and just decided to replace the computer from one in the junkyard (computer was from a f150 with automatic trans (diffent computer)), but it cranked up, and ran. then a few weeks later it started to die when running. if i hit the gas it would die, but it would idle then die. after a few minutes of cranking it would start up, idle for about 3 to 4 minutes then die again when i checked fuel pressure there was none. if i tried to crank it a few times, and checked pressure again, a little gas would dribble out (low pressure). got tired of messin with it, and it sat for about 4 years, till i recently decided to tackle it again.

So now of course it still won't start. the fuel pumps aren't comming on. i replaced both relays and the computer with a reman one from advance auto (the correct one this time, lol). still nothing. if i pull the fuel pump relay out, and jump the two fat wires, the pumps come on, and when i check pressure at the fuel rail, gas shoots out. i tried to start it witht he jumper wire on to keep the fuel pumps on, and still nothing (injectors aren't firing). if i spray starting fluid in the throttle body, it will start up and run for a few seconds smoothly till the starting fluid runs out. if i keep spraying a bit of fluid while its runs, it'll keep running till i stop. the ECC relay is getting power from the ignition, and both fat wires are hot with ignition on, and only one hot with ignition off. with the ignition on the fuel pump relay is getting power fromt he little wires, and only the yellow (always hot power wire) is getting power, and the other fat wire going to the pumps isn't geting power.

so form what i can tell the computer isn't allowing the injectors to fire or the pumps to operate. any ideas? i'm at such a loss. thanks

-Mike
_________________
1974 Super Beetle: Custom resto in progress
1972 Super Beetle: Daily Driver
1971 Std. Beetle w/ 1929 Mercedes Benz Gazelle kit
1960 Baja Bug
1969 Baja Bug
Sand Rail- Homemade
Sand Rail- FUBAR

Aircooled Airheads

Why the hell do they call it a gland nut. its obviously a big fat bolt!!!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Gary
Person of Interest


Joined: November 01, 2002
Posts: 17069
Location: 127.0.0.1
Gary is offline 

PostPosted: Tue Feb 28, 2012 8:05 pm    Post subject: Reply with quote

HIT IT WITH AN AXE!
_________________
West Virginia State Board of Education v. Barnette, 319 U.S. 624 (1943)
Back to top
View user's profile Send private message Gallery Classifieds Feedback
BugMan114
Samba Member


Joined: March 22, 2007
Posts: 3744
Location: Ellenwood, GA
BugMan114 is offline 

PostPosted: Tue Feb 28, 2012 8:28 pm    Post subject: Reply with quote

don't think i haven't thought of that already Laughing . i never really was a fan of fords, but its a really nice truck and got a really good deal on it ($300). clean interior, body has no dents, only a few scratches, 5 speed manual, chrome push bumper, chrome bed rails, and only 93K miles.


if all else fails, i can always just take everything off, and slap a carb and intake on there. so it'll be running one way or another. but i would really prefer to keep it fuel injected as it will still need to pass emisions, and isn't exempt till 2013, and i want to have it running within the next month or so.
_________________
1974 Super Beetle: Custom resto in progress
1972 Super Beetle: Daily Driver
1971 Std. Beetle w/ 1929 Mercedes Benz Gazelle kit
1960 Baja Bug
1969 Baja Bug
Sand Rail- Homemade
Sand Rail- FUBAR

Aircooled Airheads

Why the hell do they call it a gland nut. its obviously a big fat bolt!!!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
enjoyther1de
Samba Member


Joined: December 19, 2010
Posts: 1279
Location: chino,ca
enjoyther1de is offline 

PostPosted: Tue Feb 28, 2012 8:37 pm    Post subject: Reply with quote

fuel pumps are probably bad..
_________________
HBB took me to BBV.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
tirekicker
Samba Member


Joined: October 16, 2007
Posts: 826
Location: Orange, CA
tirekicker is offline 

PostPosted: Tue Feb 28, 2012 8:46 pm    Post subject: Reply with quote

Laughing
_________________
DhK
Phuckancer


(16:45:42) Russ_Wolfe: TK, you are like a Maytag washer
(16:46:44) tirekicker: and what's a maytag washer?
(16:47:35) Russ_Wolfe: If you are not agitating, you are not working right
Back to top
View user's profile Send private message Gallery Classifieds Feedback
BugMan114
Samba Member


Joined: March 22, 2007
Posts: 3744
Location: Ellenwood, GA
BugMan114 is offline 

PostPosted: Tue Feb 28, 2012 8:46 pm    Post subject: Re: 1988 Ford F-150. fuel pumps won't come on Reply with quote

BugMan114 wrote:


if i pull the fuel pump relay out, and jump the two fat wires, the pumps come on, and when i check pressure at the fuel rail, gas shoots out.


i basically bypassed the relay, and the fuel pumps came on. this model has two fuel pumps, a low pressure pump in the tank (put out around 4-6 PSI), and a high pressure on the frame rail (around 45 PSI). both came on when the relay was bypassed.
_________________
1974 Super Beetle: Custom resto in progress
1972 Super Beetle: Daily Driver
1971 Std. Beetle w/ 1929 Mercedes Benz Gazelle kit
1960 Baja Bug
1969 Baja Bug
Sand Rail- Homemade
Sand Rail- FUBAR

Aircooled Airheads

Why the hell do they call it a gland nut. its obviously a big fat bolt!!!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
chazz79
Samba Member


Joined: August 15, 2008
Posts: 2268
Location: ohio
chazz79 is offline 

PostPosted: Tue Feb 28, 2012 9:18 pm    Post subject: Reply with quote

check the fuel pump inertia switch. All fords have them in that era. It's a reset button somewhere that will turn the pumps back on. This will usually trip after hitting a larg pothole, abrupt stops or any other severe jarring motion. I'm guessing at the passenger kick panel under the glove box area.

Check the tank selection switch. An open at this juncture will not allow a pump to be chosen to direct fluid flow..
_________________
One day as a lion, or a lifetime as lamb

The green monster in bits and peices: http://www.thesamba.com/vw/forum/viewtopic.php?t=332556&highlight=green+monster
Back to top
View user's profile Send private message Gallery Classifieds Feedback
bugger101
Samba Member


Joined: September 04, 2010
Posts: 1559
Location: orlando
bugger101 is offline 

PostPosted: Tue Feb 28, 2012 10:01 pm    Post subject: Reply with quote

Hummmmm this problem sound's very similar to what the guy in the stall was working on 4 months ago at the dealer Think I remember he had to call the ford hotline I think it was the computer, try taking that one back and see if you can exchange it. check all of the lines to make sure you are getting voltage maybe a rat chewed threw some wire's while it sat. Did you check the socket's in the power distribution box?

The computer controls the fuel pump through the fuel pump relay. To prime the system the computer turns the pump on for 1-3 seconds when you initially turn the key and then continously when it senses 400 rpm at the crank. The pump runs all the time the engine is running 400 rpm or more and maintains narrow band of fuel pressure to the fuel injectors at all times.

Also unplug the ECU look at the connecter and look at all of the pin's and the one's on the ECU. Did your truck sit that long with gas in it if so drain it out and get new gas in there.

also check what chazz was telling you about
_________________
75 west deluxe http://www.thesamba.com/vw/forum/viewtopic.php?p=5270450#5270450

2010 ford focus


Last edited by bugger101 on Wed Feb 29, 2012 6:03 am; edited 1 time in total
Back to top
View user's profile Send private message Classifieds Feedback
doubledoor64
Samba Member


Joined: September 23, 2003
Posts: 1073
Location: Ideeho
doubledoor64 is offline 

PostPosted: Tue Feb 28, 2012 11:17 pm    Post subject: Reply with quote

chazz79 wrote:
check the fuel pump inertia switch. All fords have them in that era. It's a reset button somewhere that will turn the pumps back on. This will usually trip after hitting a larg pothole, abrupt stops or any other severe jarring motion. I'm guessing at the passenger kick panel under the glove box area.

Check the tank selection switch. An open at this juncture will not allow a pump to be chosen to direct fluid flow..



^ditto!
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger Facebook Gallery Classifieds Feedback
lukel
Samba Member


Joined: October 07, 2011
Posts: 213
Location: Bellingham, WA
lukel is offline 

PostPosted: Wed Feb 29, 2012 12:13 pm    Post subject: Reply with quote

chazz79 wrote:
check the fuel pump inertia switch. All fords have them in that era. It's a reset button somewhere that will turn the pumps back on. This will usually trip after hitting a larg pothole, abrupt stops or any other severe jarring motion. I'm guessing at the passenger kick panel under the glove box area.

Check the tank selection switch. An open at this juncture will not allow a pump to be chosen to direct fluid flow..


X3 Ive delt with that before.
Back to top
View user's profile Send private message Classifieds Feedback
BugMan114
Samba Member


Joined: March 22, 2007
Posts: 3744
Location: Ellenwood, GA
BugMan114 is offline 

PostPosted: Wed Feb 29, 2012 3:59 pm    Post subject: Reply with quote

already changed the gas. also checked the inertia switch, all good. i'll try swapping out the computer. man, I wish new ones were available. Laughing
_________________
1974 Super Beetle: Custom resto in progress
1972 Super Beetle: Daily Driver
1971 Std. Beetle w/ 1929 Mercedes Benz Gazelle kit
1960 Baja Bug
1969 Baja Bug
Sand Rail- Homemade
Sand Rail- FUBAR

Aircooled Airheads

Why the hell do they call it a gland nut. its obviously a big fat bolt!!!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
rgdedge
Samba Member


Joined: October 17, 2006
Posts: 865
Location: Seymour, TN
rgdedge is offline 

PostPosted: Wed Feb 29, 2012 6:18 pm    Post subject: Reply with quote

I have an 89 F-350 that acted the same way. It turned out to be the fuel pump relay connections. They were green and crusty. Cleaned the plug and it started but I went and got a new relay since it was corroded inside.
Tim
Back to top
View user's profile Send private message Send e-mail Classifieds Feedback
chazz79
Samba Member


Joined: August 15, 2008
Posts: 2268
Location: ohio
chazz79 is offline 

PostPosted: Wed Feb 29, 2012 7:24 pm    Post subject: Reply with quote

I believe terminal 86 is supplied ground when the engine is cranking. Check for ground at the relay pin that corresponds with pin 86 on the fuel pump relay. If this is happening then a computor is not necessary.

As long as I've been in this carreer path a computor has only fixed the problem 1% of the time it's replaced. Usually it's just wiping your butt with a 200.00 guess.

Get the distributor module tested. I've heard of those keeping the fuel relay off.
_________________
One day as a lion, or a lifetime as lamb

The green monster in bits and peices: http://www.thesamba.com/vw/forum/viewtopic.php?t=332556&highlight=green+monster
Back to top
View user's profile Send private message Gallery Classifieds Feedback
bugger101
Samba Member


Joined: September 04, 2010
Posts: 1559
Location: orlando
bugger101 is offline 

PostPosted: Wed Feb 29, 2012 7:47 pm    Post subject: Reply with quote

Wish i has a manual here with wiring diagrams Confused
_________________
75 west deluxe http://www.thesamba.com/vw/forum/viewtopic.php?p=5270450#5270450

2010 ford focus
Back to top
View user's profile Send private message Classifieds Feedback
MOCHABILL
Samba Member


Joined: June 12, 2008
Posts: 584
Location: BY THE BAY
MOCHABILL is offline 

PostPosted: Wed Feb 29, 2012 8:27 pm    Post subject: Reply with quote

bugger101 wrote:
Wish i has a manual here with wiring diagrams Confused


http://www.google.com/search?q=1988+ford+f150+wiri...mp;bih=566 Smile
_________________
'71 Squareback FI

'07 Passat wagon 2.0

'03 Ranger 4door 4.0
Back to top
View user's profile Send private message Gallery Classifieds Feedback
rgdedge
Samba Member


Joined: October 17, 2006
Posts: 865
Location: Seymour, TN
rgdedge is offline 

PostPosted: Wed Feb 29, 2012 8:28 pm    Post subject: Reply with quote

http://www.ford-trucks.com/forums/index.php
Might find wiring diagram here.
Back to top
View user's profile Send private message Send e-mail Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Off Topic All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2025, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.