| Author |
Message |
Halfdune
Samba Member
Joined: April 22, 2013
Posts: 7
Location: KCK
|
 Posted: Sun Aug 25, 2013 10:58 am Post subject: Going to look at 091 |
 |
|
| Howdy folks! I have finally found me an 091 tranny for my dune buggy and I'm going to look at it tomorrow. My question is are there any ways to inspect it before purchase? I have a video inspection camera but the light on the end isn't the greatest. I'm suspecting that I should be able to turn the input shaft and shift it between gears, am I correct? The guy want $800 bones firm. Its out of 76 bus and has 930 CV flanges. Thanks |
|
| Back to top |
|
 |
Multi69s
Samba Member
Joined: January 24, 2006
Posts: 5562
Location: Lefty, CA
|
|
| Back to top |
|
|
BUGGUTZ
Samba Member
Joined: March 13, 2007
Posts: 537
Location: Luzerne Mich
|
| Posted: Tue Aug 27, 2013 4:38 pm Post subject: |
|
|
Pay close attention when rolling through the gears. I bought an 002 and didnt pay close attention to it. The guy said he bought it and never ran it, it was junk! wouldnt stay in 4th and I didnt find out til I had converted my car. didnt drive it for 3 mos.
Thats alot of loot to gamble on. Could easily double if its no good but totally worth it if its a runner.
Goodluck! |
|
| Back to top |
|
|
Halfdune
Samba Member
Joined: April 22, 2013
Posts: 7
Location: KCK
|
| Posted: Tue Aug 27, 2013 7:37 pm Post subject: |
|
|
| I bought the 091. Got some other goodies in the deal too. Brand new imi starter, 2 new empi CV joints. I was able to check out closely and found no broken teeth and ring and pinion is in good condition. He installed the 930 CV flanges for his long travel sandrail project. The rest of the project was for sale too. I am happy to have it! Sorry for the other post. |
|
| Back to top |
|
|
Halfdune
Samba Member
Joined: April 22, 2013
Posts: 7
Location: KCK
|
| Posted: Tue Aug 27, 2013 7:46 pm Post subject: |
|
|
| I bought the 091. Got some other goodies in the deal too. Brand new imi starter, 2 new empi CV joints. I was able to check out closely and found no broken teeth and ring and pinion is in good condition. He installed the 930 CV flanges for his long travel sandrail project. The rest of the project was for sale too. I am happy to have it! Sorry for the other post. |
|
| Back to top |
|
|
Halfdune
Samba Member
Joined: April 22, 2013
Posts: 7
Location: KCK
|
| Posted: Tue Aug 27, 2013 7:46 pm Post subject: |
|
|
| I bought the 091. Got some other goodies in the deal too. Brand new imi starter, 2 new empi CV joints. I was able to check out closely and found no broken teeth and ring and pinion is in good condition. He installed the 930 CV flanges for his long travel sandrail project. The rest of the project was for sale too. I am happy to have it! Sorry for the other post. |
|
| Back to top |
|
|
Halfdune
Samba Member
Joined: April 22, 2013
Posts: 7
Location: KCK
|
| Posted: Tue Aug 27, 2013 7:47 pm Post subject: |
|
|
| I bought the 091. Got some other goodies in the deal too. Brand new imi starter, 2 new empi CV joints. I was able to check out closely and found no broken teeth and ring and pinion is in good condition. He installed the 930 CV flanges for his long travel sandrail project. The rest of the project was for sale too. I am happy to have it! Sorry for the other post. |
|
| Back to top |
|
|
Bashr52
Samba Member
Joined: July 16, 2006
Posts: 5669
Location: On an island in VA
|
| Posted: Wed Aug 28, 2013 5:14 am Post subject: |
|
|
Wow you must be really excited about this! 4 posts in a row!  |
|
| Back to top |
|
|
BUGGUTZ
Samba Member
Joined: March 13, 2007
Posts: 537
Location: Luzerne Mich
|
| Posted: Wed Aug 28, 2013 3:52 pm Post subject: |
|
|
| OK just to be clear, did you buy the 091? |
|
| Back to top |
|
|
|
