| Author |
Message |
johnnyvw164
Samba Member
Joined: July 27, 2020
Posts: 617
Location: South of Raleigh
|
 Posted: Fri Sep 18, 2020 6:41 am Post subject: Info needed on older EMPI P/C set |
 |
|
I found someone local selling a EMPI 92mm P/C set, made in 2012. The EMPI part number is 98-1992-B. They look to be Brazilian made with forged pistons. There is a product code of K70371 from the manufacturer. Does anyone out there know anything about these, how good they may be (especially compared to what's currently on the market)? I hadn't planned on going to that big of a bore, but if these are something good I may consider them.
Thanks!! |
|
| Back to top |
|
 |
halfassleatherworks
Samba Member
Joined: December 09, 2018
Posts: 794
Location: Reno NV
|
| Posted: Fri Sep 18, 2020 6:52 am Post subject: Re: Info needed on older EMPI P/C set |
|
|
check here
https://www.amazon.com/EMPI-98-1992-B-FORGED-PISTON-CYLINDER/dp/B00BBJUZEK
Product description
Mahle Brand Forged 92mm X 69mm Aircooled Vw Pistons And Cylinders.
92mm X 69mm = 1835cc
Machining Required On Heads 90.5/92mm
Machining Required On Case 90.5/92mm
Complete Set Includes:
Set Of 4 Barrels, Forged Pistons, Rings, Wrist Pins And Clips.
Applications For Volkswagen Air Cooled Engines, Type 1 Bug, Beetles, Karmann Ghia, Type 2 Bus, Type 3 Squareback, Fastback, Notchback.
Mahle K70371
Last edited by halfassleatherworks on Fri Sep 18, 2020 6:54 am; edited 1 time in total |
|
| Back to top |
|
|
Dan Ruddock
Samba Member
Joined: October 25, 2012
Posts: 3668
Location: Sarasota, in my adopted state of Florida
|
| Posted: Fri Sep 18, 2020 6:53 am Post subject: Re: Info needed on older EMPI P/C set |
|
|
| johnnyvw164 wrote: |
I found someone local selling a EMPI 92mm P/C set, made in 2012. The EMPI part number is 98-1992-B. They look to be Brazilian made with forged pistons. There is a product code of K70371 from the manufacturer. Does anyone out there know anything about these, how good they may be (especially compared to what's currently on the market)? I hadn't planned on going to that big of a bore, but if these are something good I may consider them.
Thanks!! |
Sounds like cima/mahle. Do you have the box? Pic of the spec label would help. What is his price. Are they a stroker set? They are very good quality.
Dan |
|
| Back to top |
|
|
johnnyvw164
Samba Member
Joined: July 27, 2020
Posts: 617
Location: South of Raleigh
|
| Posted: Fri Sep 18, 2020 9:37 am Post subject: Re: Info needed on older EMPI P/C set |
|
|
I have a picture of the labels on the box, that's where I got the part numbers from. They are 69 x 92.
If anyone is interested, I could put you in touch with him. He is located in Easton PA
I took another look at the picture, Mahle is written all over it (literally...LOL) |
|
| Back to top |
|
|
vwracerdave
Samba Member
Joined: November 11, 2004
Posts: 15599
Location: Deep in the 405
|
| Posted: Fri Sep 18, 2020 10:13 am Post subject: Re: Info needed on older EMPI P/C set |
|
|
I'm sure they are the standard wall 92's
_________________
2017 Street Comp Champion - Thunder Valley Raceway Park - Noble, OK
2010 Sportsman ET Champion - Mid-America Dragway - Arkansas City, KS
1997 Sportsman ET Champion - Thunder Valley Raceway Park - Noble ,OK |
|
| Back to top |
|
|
|
