bugguy1967 - [email protected] - Tabari

[bugguy1967]

Context to the 2/24 feedback: I was travelling out of the country, my email was set to notify people that emailed, but the customer used thesamba to message me. 1.5-2 weeks was enough time for him to lose patience and decide to leave feedback that affects my reputation.

When I returned, I followed up, but he had already decided to use another spring set. Nothing is wrong with Statesides. His spring pockets must be too small. If the customer wouldn't have damaged the springs by grinding on them, I would've either refunded or traded the springs with the Otevas that he originally asked for.
_________________
"A petrol engine can start readily, run smoothly and give every appearance of being in good order, without necessarily being in good tune." - Colin Campbell, "The Sportscar Engine"

[Bug53]

Originally I posted as a satisfied buyer and everything acceptable.
After trying to use Stateside single valve springs on a stock head they do not fir in AutoLinea heads without modification. They are considerably larger in diameter than OEM springs.
Tried PM to Tabari.
One week now .......... crickets!

Stateside Tuning singles are a loser.

Careful of this seller despite the good reputation.
_________________
Never blame lazy people, they didn't do anything.

[Bug53]

Bought a set of single Stateside springs.
Shipped quickly and
as described.
Nice stuff.
Thanks
_________________
Never blame lazy people, they didn't do anything.

[Don Jones]

Outstanding Seller - I purchased rocker shaft shims and they were of excellent quality. I couldn't have shimmed my Scat rockers without his great assortment of shims. I will purchase from him again!

[Jason37]

Purchased rockers and surfaced rocker blocks. Excellent communication, parts were prepped in a timely fashion and well packaged. Thanks again.

[Lost69Convertible]

I bought thermostat control flap retention clips from buguy1967. Good price, they arrived a week later, and the condition on the parts was good and matched the advertisement. The retention clips fit my control flaps very well. Good seller, I recommend.
_________________
1956 Beetle Ragtop: My Father's car
1969 Beetle Convertible: My first car. I loved it, I lost it, and I never got over it.
1979 Super Beetle Convertible

[Bill Dykes]

Great price,quality, and fast shipping. Thanks Tabari.

[calvinater]

Bought some back cut rockers and TP adjusters, excellent time frame and beautiful work. Thank you.
_________________
"Albatross"!

[Lingwendil]

Picked up an older US made alternator pulley from Tabari recently, it was well packed, priced reasonably, and shipped quickly. Great experience, highly recommended!
_________________
73 super beetle thread http://www.thesamba.com/vw/forum/viewtopic.php?t=649622 Back on the Road!

Modify your Kadrons for SVDA http://www.thesamba.com/vw/forum/viewtopic.php?p=8115884#8115884

Cast iron VJU4BR8 SVDA reference thread- https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Need replacement filters for original Kadron aircleaners? WIX #42087 is a perfect fit, as is Napa Gold #2087!

[Busstom]

Good seller, great prices, fast shipping! Thanks T-man.

[bad91teg]

i bought a modified fan shroud from him . the dude is good . great parts .very good packaging . and fast .. thanks !!!!!!!!!!!!!

[fuguboy]

Fast shipping to Hawai’i easy transaction.

[toxicavenger70]

Excellent seller! I just got the parts for rebuilding my thermostat flaps and a reconditioned thermostat. Great person to deal with.

[exotic plants]

Super seller! I highly recommend Tabari. Excellent service and quality. It truly doesn't get any better.

He built some 36 HP solid shaft rockers for me. His machine work is second to none.

I would buy from him again.
_________________
1956 Beetle - Jungle Green.
Parts needed to complete:
Front driver side fender.
Rear driver side fender.
Cash waiting.
------------------------------------------------------------

[ryohey]

Bought a Crankshaft Timing Gear Retaining Clip. Got it fast, great communication. Will def buy from again.
_________________
69 bug restoration thread http://www.thesamba.com/vw/forum/viewtopic.php?t=387230&highlight=

[EverettB]

Bought a pulley from me
Everything went great
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery!

[tommu]

I bought a set of swivel foot valve adjustors from Tabari. He responded very quickly to my questions, shipped quickly and sorted out an issue we had perfectly.

I will be more things from you.
_________________

[rodjr]

Tabari has machined a bunch of rockers for me as well as flycut some heads and match ported intakes. First class work ALWAYS! He always asks any questions before he begins to make sure he does exactly as you wish, very refreshing in a hobby where everyone seems to do it however they want regardless of what you ask for.
I have always been happy with Tabari's prices, and he always gets work done in a timely matter, always reply's in a short time when i try to contact him.
can't beat the service!

[Culito]

I've been working with Tabari on a custom Type 4 top end rebuild (new pistons, cylinders, heads). He's been extremely helpful throughout the entire process.

Highly recommended!
_________________
© CJ Industries, Inc.
'64 standard w/2.0L type 4
'62 bug

[dennismcd707]

I had Tabari order some 1.1 rockers and then machine them for me (back cut and dished). I just got them and they look terrific. Good communication, packaging, and machine work. I highly recommend buying 'stuff' from Tabari.
_________________
1971 Super Beetle, 1776, dual Weber's, roller crank, modified large valve heads on match ported intakes, 9.2 to 1 compression, close ratio trans, lowered suspension, 4 wheel disc brakes, truss bar and other goodies. Car has over 370,000 actual miles, and counting. (RIP 1970 Beetle/Baja, 1986 GTI, 1999 Jetta, 2002 Jetta)