70 Square Turn Switch Replacement

[mark40]

Need new turn switch for the 70 Square. Is the quality of the new ones good or still better with expensive, hard to find NOS?

Thanks.

[swhitcomb]

Depends. There are new German ones, and new Chinese ones.
_________________
My 71 Ghia Been in my family since 1980
My Patina 66
My 74 Ghia
07 Boxster

[Bobnotch]

I went good used on my wife's car. On it I used the turn signal/wiper switch from a 72, and split the 2 units apart, then used the shorter tubes and screws from the 70 unit to install it. It's been in the car since 2000, and still works just fine.
_________________
Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120

[mark40]

[swhitcomb]

I’d go with German. It’s a much better made switch.
_________________
My 71 Ghia Been in my family since 1980
My Patina 66
My 74 Ghia
07 Boxster