Mystery 4x130 Mesh wheels Alleycat Crosspoke?

[Ohio_Style]

I bought these yesterday at a swap, trying to identify them. Steel barrel, aluminum center. 15x5.5. No markings on them anywhere.

Kinda cool set of wheels, I think I'm going to powdercoat them white and put them on my wife's squareback.

_________________
Matt Johnson

https://www.youtube.com/@ZeroBalanceBuilds

[Typ3nut]

Hello Matt,
Seen these at the Michigan BB Swap.
Alleycat Spoke Wheels are Aluminum Mag Wheels.
I started a tread ... " 4 Lug VW Shelby Diamondback Mag Wheels " that have a set of these posted.
https://www.thesamba.com/vw/forum/viewtopic.php?t=729972
I pretty certain the wheels you have are Trans-American Products RADER Wheels named "Spider" 32 spokes as the similar style Aluminum Mag Wheels have 36 spokes.
I also didn't see any markings. Are you sure their 5.5" wide and not 5" ?

[Ohio_Style]

Ok, it was hard to tell from the one picture I found if Alleycats had steel or aluminum barrels. If they are aluminum then the only other option I can find are the Transamericans as seen here:

http://www.buggyboys.be/en/velgen_4x130_01.htm

I looked at all of them very closely and cannot find any markings at all

I've not broken them down yet so it's completely possible they are 5". I bought them at the end of the day when we were packing up for less than half what he had on them.

I also picked up the set of Western 14x7 Cyclones for a pretty good deal.
_________________
Matt Johnson

https://www.youtube.com/@ZeroBalanceBuilds

[Typ3nut]

Hey Matt,
That buggyboys database hasn't been updated since 2005, good reference but a lot of wheels on there are incorrectly named.
Here's one for Vintage Wheels ... http://vintagewheelcatalogs.com/

Look at " RADER " Wheel Corp. of America 1965 which then became " Trans-American Products Ltd. " 1966.

Google Alleycat Crosspoke Wheels and you'll see their Aluminum Mag Wheels.

[Obi-Sean Kenobi]

Where can I find the lug bolts for this style wheel? (69 Ghia).

[Mike Fisher]