1 5/8 merged header gasket part number

[Sergeantz]

So, I did a search. No luck. I'm trying to replace the gasket between the merged header flange and the stinger. I've got a mass leak there and wasn't to swap it out. I'm trying to see if AutoZone has something that will work but I have no part number. It's killing me because they're all over the internet but none of the part numbers match their systems. Am I out of luck?

Thanks.

-Noah

[Glenn]

Not a part you can buy at a auto parts store.

Which brand header?

You could just make your own from a sheet of gasket material.
_________________
Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Member #1009

#BlueSquare

עַם יִשְׂרָאֵל חַי

[Sergeantz]

I thought so.

It's the stainless steel EMPI setup. I think I'm going to have to cut my own.

Thanks brother.

[mark tucker]

I would try to go with copper or aluminum...or...cb perf has some that are supposed to be pretty good.I think there a composit type.

[scubaseas]

Try the walker exhaust catalog Might be a 31366

NAPA carries the walker line

http://www.walkerexhaust.com/products/accessories-hardware
_________________
Al

08/1970 T2a Westphalia owned since 1980

ASE Master certification. 50 years pushing a wrench
Retired

[sherco_chris]

I know this is an 8 year old post but I need a small 3 bolt header flange gasket and I think it might be a Felpro 60575, which my local Autozone has in stock.
I'll report back.

[ps2375]

This is why I had a V-band connection put on my merge, no gasket and no leaks.

[NJ John]

That’s next, tig weld V band flange’s to the heads!
_________________
1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage

[my3bugs]

i checked CarCrafts website and i dont see it , but some time ago they sold me a copper 3 bolt gasket for my headers 1 1/2 , i been using or re using it for years . ya might ask em .

https://carcraftstore.com/search.aspx?find=copper+gasket

Jbugs has copper 1 5/8 copper exhaust gaskets but not the flange .

[Glenn]

CB Performance

https://www.cbperformance.com/product-p/3694.htm
_________________
Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Member #1009

#BlueSquare

עַם יִשְׂרָאֵל חַי

[sherco_chris]

I can confirm that the Fel-Pro 60575 gasket fits and is available from my local FLAPS. It is the collector gasket for a 1977-1987 BMW 6 series 2.7, 3.0 and 3.2 liter. The CB Performance gasket is much better, but this was on the shelf and I could get rid of that raspy exhaust leak!