Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Classifieds Index -> Vendors - New Parts -> High Performance/Engine
RJE Lifter bore top clearance tool Turn on always show all large photos     Ad id: 1350265
Photo
Additional Photos
Click to load image
L & R arrow keys scroll through photos
Photo Photo Photo
RJE Lifter bore top clearance tool   Price: $143 shipped USA
Lifter bore clearance tool. This tool will trim the top of the lifter bores for higher lift cams in bug style blocks 19mm bores. You should have at least .050 from the cam to the lifter at full lift. This tool also cuts a small relief at the top. This tool with 3/8 hand drill without a drill press will do the job just fine. The tool has a stop plate so you can put feeler gauge under the adjustable collar to set the amount you want to cut from the top of the lifter bore. Once you have one set it will cut all the rest to the same height in about 5 min. As pictured check other picture also. Note oil the end of the tool and the bushing bore before you start to cut. $143 shipped USA my email & paypal is [email protected]

_________________
www.rockyjennings.com
Advertiser information Ad information
Advertiser:
Name:
Member since:
PocketRocket
Rocky Jennings Enterprises
September 22, 2005
Contact advertiser

Phone: Click to Show

Email this Advertiser
Email this Advertiser
Location: 
Ad placed: 
Ad renewed: 
Ad last edited: 
Views: 
Category: 
Payments accepted: 
Walla Walla, Washington, USA Map it
Fri Aug 24, 2012 3:33 pm
Sun Aug 16, 2020 3:07 pm
Tue Nov 19, 2019 11:17 am
11653
Vendors - New Parts - High Performance/Engine
Paypal
Money order/Bank check

View other ads View profile Search for Feedback Watch this ad | Report this Ad
Watch this seller Share: Email Facebook Twitter
Other ads from PocketRocket
See all | See ads in this category
RJE WBX Race block stud kit
RJE WBX Race block stud kit
RJE WBX Lifter bushings to BUG lifters
RJE WBX Lifter bushings to BUG lifters
RJE WXB 200mm Flywheel Forged
RJE WXB 200mm Flywheel Forged
RJE WBX Intake Boots (set of 4) T-2 Vanagon
RJE WBX Intake Boots (set of 4) T-2 Vanagon
RJE Line bore cutters any bug size VW tool align
RJE Line bore cutters any bug size VW tool align


About | Help | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2020, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB