|
Weber Delorto US Made HardLine Fuel Kits Price: See ad
|
My name is Pete Skiba, I am the COO of Airkewld. I am a VW fanatic. I love them. I enjoy making cool products for them every year. But some times, we forget about the basics. This email is about the basics with our beloved Volkswagens.
My father, Ken Skiba, owner of Buggyworld, has been wrenching on VW's since the early 70's. I remember the lesson of checking clients carbs for the gas smell, if the inlets in the carbs were loose, checking the hoses to see if they were brittle or not,etc. Sometimes finding a good quality hose clamp is better than finding one at pick-a-part or a China made one at an auto parts house.
You could go check on your hoses right now as you read this..... go on, go check them out, smell around your carbs, check your gas lines, look underneath the car where it connects to the fuel line to the chassis. If it is hard, brittle or doesn't have a hose clamp on it, it's time for some maintenance.
No you could go to one of your local auto parts houses and get some new fuel lines, clamps and fuel filters. Already better than you were. Or you can get your self some Finished Lines.
Finished Lines are a series of stainless steel hard lines and fittings to join dual carbs together and route them cleanly inside the engine compartment. Each connection is hydraulic, so if you flare them correctly and tighten them nicely, the fuel smell, the fire danger, the doubt in the bottom of your stomach is all but gone.
I see your head bobbing up and down.... I get it. I was stoked when I decided this industry above all other needed this the most.
Fits all air cooled VW's including the Beetle, Super Beetle, Ghia, Type 3, Bus, Thing and Fridolin.
Weber/Decade/Empi HPMX Carbs that have brass screw-in fuel inlets - http://www.airkewld.com/IDF-Weber-Hardline-Fuel-Line-Kit-p/8083.htm
40mm IDF Carbs
44mm IDF Carbs
48mm IDF Carbs
The kit comes pre-bent with stainless steel .375" tubing that can be cut to length to fit your application. This will do all the fuel lines needed in the engine bay that is not running a stock fuel pump application. You will need a soft line from the back of the tin union to the chassis fuel line outlet. Please check out the under the deck lid category here for it. The kit comes with everything you see in the picture.
Carb fittings
B nuts
Sleeves
Tee
Gauge adapter
Liquid filled psi gauge
Tin union with nut
2x mandrel bent carb lines
1x center line
1x drop down line
5 Star Review
November 18, 2014
Reviewer: Taylor from Marysville, WA United States
Great product as I'm be coming accustomed to evertime I order. Keep up the great work.
5 Star Review
Reviewer: Hoot from Albuquerque, NM United States
This is the BEST FUEL system you can buy. There is just so much room in the engine compartment. When a pair of IDF's are added there is even less. Rubber Fuel lines and clamps work, sort of. Stainless braided lines are bulkier and work, again sort of. This KIT is the one. Give your self a break from trying one or both of the other types, it will save you in the end. This kit has every thing you need, except a flaring tool and a tube cutter. No clamps, the fuel lines and fuel pressure gauge are self supporting. It's a very clean installation. The fuel lines when assembled become a fuel manifold, no leaks nothing flopping around and plenty of room for throttle linkages, spark plug wires, and whatever you want to add.
Fits these Weber/Empi EPC Carbs that have Banjo fuel inlets - http://www.airkewld.com/IDA-Weber-Hardline-Fuel-Line-Kit-p/8082.htm
48mm IDA Carbs
51mm EPC Carbs
48mm EPC Carbs
5 Star Review
Reviewer: craig schulz from redmond, OR United States
this kit is the best on the market with out a doubt and I'm super pleased with it
Fits these Dellorto Carbs that have 12mm screw-in fuel inlets - http://www.airkewld.com/Dellorto-12mm-Hardline-Fuel-Line-Kit-p/8080.htm
36mm Carbs
40mm Carbs
45mm Carbs
48mm Carbs
Fits these Dellorto Carbs that have a 7mm screw-in fuel inlets - http://www.airkewld.com/Dellorto-7mm-Hardline-Fuel-Line-Kit-p/8081.htm
36mm Carbs
40mm Carbs
45mm Carbs
You will need a cutting device of some kind, we recommend a tubing cutter. You will need a 37 degree flaring tool as well. Check our tool section if you don't already have them.
http://www.airkewld.com/Flaring-Tools-p/8601.htm
Youtube Video
https://www.youtube.com/watch?v=L3jin_njy9o
thesamba.com members only discount - Samba19
_________________
If you have any questions or concerns about the product when you receive it or install it, please contact us first. We want you to be 100% satisfied.
We can ship anywhere in the world. We ship UPS and USPS. Visa, American Express, Master Card, Wire transfers and Paypal are accepted online & over the phone.
(623)518-3537 BIZ/Text/Fax
International calls (011) 623-513-3537
Airkewld Catalog is coming soon, get yours today - https://airkewld.co/2018-19AirkewldCatalog
|
|
|
|
