|
Weber IDA, Solex Throttle Return Spring Bracket Price: $14
|
After working on and seeing Weber IDA return spring wrapped under the top plate nut or screw and the angle being off so much that the spring was rubbing on the body badly. So I decided to make my own.
If you have a drag car you'll need to have a return spring set up to pass tech.
FITS Weber IDA Solex 40P-11 and Zenith 32
At this time they do not work on the Weber IDF carbs. Working on that in the future.
I sell them as a KIT. You get 2 Brackets and 2 return Springs for $14
Depending on the pedal pressure the springs can be stretched a little for your needs. Also depending if you attach the bottom part of the spring to the actual carb arm or to the bottom linkage rod itself. I went and drilled a hole in the carb arm. See photo in ad. To secure the spring.
These are laser cut and Silver zinc plated.
[email protected]
Google Search: gary berg vw
Samba Search: berg
_________________
Please add shipping.
|
|
|
|
