|
Gene Berg Grooved Venturi for IDA Price: $40.00ea-UP
|
In our experience, the biggest bang for your buck you can get.
These venturi were CAD drawn to optimize flow and volume, flow bench tested, dyno tested, street and strip tested before release to the public. Results so far show a high HP gain of 22hp and a low of 10hp, both with increased drivability.
With a regular venturi, you are dealing with a set number. Increasing the size will give you more volume at the expense of airspeed. On the flow bench both airspeed and volume showed an increase with these venturi. If you are running a 40mm venturi you can opt for the 37/42, which will give you better top and bottom end, or the 35/40 which will keep the top end where it is but give you a lot more bottom end and drivability. At the end of the day the limiting factors will be the cam and heads. Be aware that you may have to increase the size of the air or drop the main jet size to accommodate the extra flow. We recommend having an 02 sensor for proper jetting & tuning
The original and best. Originated at Gene Berg Enterprises by Doug Berg in 2013. Pat. Pending.
GB 514G 35/40, 37/42, 40/44 and 42/46. Available for 48 and 51.5 IDA.
Also seeGB 510G, GB 511G and GB 512G for 40,44 & 48 IDF ones.
_________________
Also try WWW.GENEBERG.COM
IF YOU ARE IN TOWN FOR DRAG DAY PLEASE CALL AHEAD TO MAKE SURE WE HAVE WHAT YOU WANT AVAILABLE TO AVOID DISAPPOINTMENT.
2.5% PAYPAL FEE APPLIED TO PAYPAL ORDERS
|
|
|
|
