| Author |
Message |
bikeone43 Samba Member
Joined: December 08, 2010 Posts: 38
|
Posted: Sat Feb 09, 2013 9:54 am Post subject: Berry mini-t |
|
|
| who manufactured the berry mini-t or any info |
|
| Back to top |
|
 |
EVfun  Samba Member

Joined: April 01, 2012 Posts: 6345 Location: Seattle
|
Posted: Sat Feb 09, 2013 12:25 pm Post subject: |
|
|
Berry Plasti-Glass works, Pismo Beach California, produced the Berry Mini-T, the Mini-T4 (4 seat for full length chassis), and a C-cab back for the Mini-T. They where produced from 1969 to 1971. There are other companies who have produced T style buggy bodies over the years. I am building one right now. _________________
| Wildthings wrote: |
| As a general rule, cheap parts are the most expensive parts you can buy. |
Last edited by EVfun on Sat Feb 09, 2013 2:06 pm; edited 1 time in total |
|
| Back to top |
|
 |
bikeone43 Samba Member
Joined: December 08, 2010 Posts: 38
|
Posted: Sat Feb 09, 2013 1:15 pm Post subject: berry mini-t |
|
|
| thank you i have one i have been working on for two years just about done working on interior thanks again |
|
| Back to top |
|
 |
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6768 Location: Northern California
|
Posted: Sat Feb 09, 2013 7:05 pm Post subject: |
|
|
I'm pretty sure Berry was in Long Beach, 1123 Nevada Street. Hale got it wrong in his book.
EV, PM me your email, I'll send you some stuff. |
|
| Back to top |
|
 |
EVfun  Samba Member

Joined: April 01, 2012 Posts: 6345 Location: Seattle
|
Posted: Sat Feb 09, 2013 8:17 pm Post subject: |
|
|
It looks like you are right, despite what the buggy bible has to say. The old advertising literature posted online all seems to list Long Beach. _________________
| Wildthings wrote: |
| As a general rule, cheap parts are the most expensive parts you can buy. |
|
|
| Back to top |
|
 |
kustoms Samba Member

Joined: November 20, 2003 Posts: 1313
|
Posted: Mon Feb 11, 2013 8:08 am Post subject: |
|
|
Just thought I would post this.
The Berry-T snow machine.
Photo thanks to Kieth. _________________ Google this.
"Bread and Circuses"
And wondering what the heck happen to my Samba post count?!?
Tom Thompson
Tijuana Kustoms Inc. (TM)
1-516-338-8746
www.tjkustoms.com |
|
| Back to top |
|
 |
NETAAA Samba Member
Joined: March 20, 2013 Posts: 4 Location: Pomona, Ca
|
Posted: Wed Mar 20, 2013 8:55 pm Post subject: |
|
|
after a couple of years of sitting, im finally starting to work on it. im removing the tank to clean it and i found a sticker on the body on top of the gas tank. it says mini T4 long beach Ca. cant wait to get it running again!
i cant figure out how to post a pic, but i somehow posted one on "other vw vehicles" |
|
| Back to top |
|
 |
surfnc Samba Member

Joined: September 29, 2006 Posts: 948 Location: OBX, NC
|
|
| Back to top |
|
 |
NETAAA Samba Member
Joined: March 20, 2013 Posts: 4 Location: Pomona, Ca
|
Posted: Fri Mar 22, 2013 2:20 pm Post subject: |
|
|
| surfnc wrote: |
Here you go:
|
Cool! Thanks! |
|
| Back to top |
|
 |
charlindabob Samba Member

Joined: October 13, 2010 Posts: 44 Location: Lake Panasoffkee, FL
|
|
| Back to top |
|
 |
EVfun  Samba Member

Joined: April 01, 2012 Posts: 6345 Location: Seattle
|
Posted: Wed Mar 27, 2013 6:42 pm Post subject: |
|
|
Very nice! Is that the original gelcoat? Your looks to be Corvair powered. Mine is about to be electric powered.  _________________
| Wildthings wrote: |
| As a general rule, cheap parts are the most expensive parts you can buy. |
|
|
| Back to top |
|
 |
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6768 Location: Northern California
|
Posted: Wed Mar 27, 2013 7:50 pm Post subject: |
|
|
Looks great, really like the wheels and tires.
|
|
| Back to top |
|
 |
charlindabob Samba Member

Joined: October 13, 2010 Posts: 44 Location: Lake Panasoffkee, FL
|
Posted: Thu Mar 28, 2013 7:13 am Post subject: |
|
|
It has the original gel-coat and yes, it is Corvair powered by a 150hp Corvair turbo. It has Corvair running gear including the steering wheel, dash instraments and tail lights. Frame is square tubing with a 3/4" plywood floor.
I have the body off and wiring tore out (there were "thousands" of wires) and working on the brakes. This buggy had been sitting awhile and needed cleaning up and lots of attention. I have had the engine running but it needs gone over, but one thing at a time. _________________ Bob Leibold, Lake Panasoffkee, Florida
I used to be indecisive, now I'm not so sure. |
|
| Back to top |
|
 |
charlindabob Samba Member

Joined: October 13, 2010 Posts: 44 Location: Lake Panasoffkee, FL
|
Posted: Thu Mar 28, 2013 7:21 am Post subject: |
|
|
| EVfun wrote: |
Very nice! Is that the original gelcoat? Your looks to be Corvair powered. Mine is about to be electric powered.  |
I hope you take pictures as I find the electric aspect very interesting. Batteries go up front? And if so, how easy will they be accessed? Right now on my buggy, you have to raise the body to get to the master cylinder! I wish I could figure out a "tilt" body for it. Be nice to pull a couple of pins and have the whole body tilt up out of the way, huh? _________________ Bob Leibold, Lake Panasoffkee, Florida
I used to be indecisive, now I'm not so sure. |
|
| Back to top |
|
 |
charlindabob Samba Member

Joined: October 13, 2010 Posts: 44 Location: Lake Panasoffkee, FL
|
Posted: Thu Mar 28, 2013 7:36 am Post subject: |
|
|
| NETAAA wrote: |
after a couple of years of sitting, im finally starting to work on it. im removing the tank to clean it and i found a sticker on the body on top of the gas tank. it says mini T4 long beach Ca. cant wait to get it running again!
i cant figure out how to post a pic, but i somehow posted one on "other vw vehicles" |
I hope you post some pictures and especially interested in the roll bar as I haven't seen a Mini-T with one and that one appears to look good on your buggy. _________________ Bob Leibold, Lake Panasoffkee, Florida
I used to be indecisive, now I'm not so sure. |
|
| Back to top |
|
 |
EVfun  Samba Member

Joined: April 01, 2012 Posts: 6345 Location: Seattle
|
Posted: Thu Mar 28, 2013 6:00 pm Post subject: |
|
|
Can you post a picture of the body tag? I can find mine, but it isn't readable. I do see that "purple" was written in pen near the lower right corner.
I will get pictures of the electric install. The motor is already in place and can be seen in some picture. My plan right now is to put 39 cell under the pickup bed (3 rows in 13 cells) for about a 200 lb. pack. I have room for 10 cells up front, but only have 42 of these older Lithium cells. _________________
| Wildthings wrote: |
| As a general rule, cheap parts are the most expensive parts you can buy. |
|
|
| Back to top |
|
 |
NETAAA Samba Member
Joined: March 20, 2013 Posts: 4 Location: Pomona, Ca
|
Posted: Thu Apr 04, 2013 4:39 pm Post subject: |
|
|
| EVfun wrote: |
Can you post a picture of the body tag? I can find mine, but it isn't readable. I do see that "purple" was written in pen near the lower right corner.
I will get pictures of the electric install. The motor is already in place and can be seen in some picture. My plan right now is to put 39 cell under the pickup bed (3 rows in 13 cells) for about a 200 lb. pack. I have room for 10 cells up front, but only have 42 of these older Lithium cells. |
The body tag isnt readable on mine either, but i did find this sticker above the gas tank.
|
|
| Back to top |
|
 |
EVfun  Samba Member

Joined: April 01, 2012 Posts: 6345 Location: Seattle
|
Posted: Fri Apr 05, 2013 5:44 pm Post subject: |
|
|
Thanks for that. The label above my gas tank (more over the engine on the 2 seat mini-t) is unreadable and now I know about what it was supposed to look like. I can faintly read where someone with a ball point pen wrote "purple." My tag has the same proportions and the same mottling, but is generally more gray and faded to the point of showing only the tiniest hints of the original printing. Perhaps I'll try photographing it and then enhancing the photos. _________________
| Wildthings wrote: |
| As a general rule, cheap parts are the most expensive parts you can buy. |
|
|
| Back to top |
|
 |
kustoms Samba Member

Joined: November 20, 2003 Posts: 1313
|
Posted: Sat Apr 06, 2013 9:00 am Post subject: |
|
|
I gues they did not get the patent. My "T" is a low number body.
_________________ Google this.
"Bread and Circuses"
And wondering what the heck happen to my Samba post count?!?
Tom Thompson
Tijuana Kustoms Inc. (TM)
1-516-338-8746
www.tjkustoms.com |
|
| Back to top |
|
 |
NETAAA Samba Member
Joined: March 20, 2013 Posts: 4 Location: Pomona, Ca
|
Posted: Mon Apr 08, 2013 2:23 pm Post subject: |
|
|
here's a couple more..
|
|
| Back to top |
|
 |
|