Wolfsburg Alloy center caps 4 lug rims WBC-2 Price: $80 SHIPPED
Nearly out of stock but more has already been cast in Calif, needs go be polished in Oc, tap and threaded in Az... and planning a restock trip late Aug or first week of Sept....
Wolfsburg Alloy wheel center caps for 4 lug OEM (VW / Porsche) and AMERICAN made American Eagle rims like Porsche & Imitation 2.0 Liter, Empi 8 spoke (they may fit the made in China rim version with longer set screws), Mahle 914, Riveria (not the very early 3" center hole rims), Talladega, some Cast wire mags and some BBS rims that will also take the OEM Porsche center caps.
DOES NOT FIT EARLY RIVIERA 914 LARGE hole 4 lug rims....
Part number: WBC-2 Set $65 and shipping $15
Price: $80 per set of 4x (singles are $25 each and shipping is like $10...)
Shipping: free (Med. Flat rate Priority shipping)
Canada USPS Priority $35
NO OTHER INTERNATIONAL Sales as I have been burned too many times. Buy them from my e Bay store as I ship to their KY location and they handle the overseas shipping...
Calif. Sales tax (if you live in Calif. only): $8.00
Rim / Wheel center opening that these caps will fit (the 3x set screws can be run out for larger center holes):
60 mm or 2 3/8" Inside
to 73 MM or 2 7/8" (may need longer than stock 8x32x1/4" set screws)
From the center rim outer edge to inside the cap distance (covers up extended axle end and dust caps): 33 mm or 1 5/16"
If you have the OEM mushroom (side view) dust caps on the early VW's, or the later dust caps with 2 bumps on the sides, you might will need to change over to the smooth side Brazilian dust caps.
There's 3x set screws per each cap for attachment to the wide range of wheels. A little trick is to use the included allen wrench from the inside thru the hole and then slip allen set screw onto wrench and screw it back into the threaded hole. Use blue Loctite on the set screws to prevent backing out.
Insert the WBC cap into the uninstalled rim / wheel, equally tighten the set screws to the rim hole. If you live in a bad area, you can remove the WBC cap and drill little divots that the set screws hit to get them set deeper into the rim to help from people prying them off.
You place them on the rim and use the short end of the allen wrench to tighten the cap down with the set screws.
Then you install the wheel (with the caps already on the rims) onto the car drums / brake discs.
If you every use a tire shop later on, make sure the tire shop has that allen wrench, hand tap the center caps to test to see if they are lose before you leave their tire shop so if they just slip them on, you'll find it before you lose a cap!
Singles are available too, but expensive shipping.
For mailed orders:
USPS Money order or check (held until it clears the bank before shipping the order):
7760 E. State Route 69
Prescott Valley, AZ 86314
Please. fill this out & put it in the “MESSAGE SECTION” at Paypal [email protected] :
Part # WBC-2
Any special instructions (home or business address listed or wanted shipped to, shipping service wanted USPS or UPS, your A/C & phone number, etc…):
Thank you for buying Werksberg Products…. products that work!
Made in America by Americans for the world!
Werksberg Products...products that work!
Paypal: [email protected]
M/O, or check...will be held until they clear before shipping..... In AZ now!
February 08, 2005
Ad last edited:
Prescott Valley, Arizona, USA Map it
Wed Sep 28, 2011 7:37 pm
Sat Oct 24, 2020 8:09 am
Mon Oct 19, 2020 10:33 am
Parts - Wheels/Tires
Money order/Bank check
Watch this ad |
Watch this seller