|
1968-1979 Bay Blk/Grey ABS plastic interior panels Price: $25 and up...
|
4/23/18 ABS plastic Bay Window Bus Interior panels
NEW Lower prices on the door panels...
Black or NEW OEM Grey ABS Panels (but special order as I have not made / stock the Grey panels for the Bays yet. All the Splits Buses and Vanagons yes... not the Bays as those other groups had them stock OEM)
Possible discount for full kits for cash, local pick up in Prescott, AZ area....
I don’t get a discount on this little amount of ABS materials and the labor is the same too….
Make a list (copy & paste) with the part #s (33-XXX- year range) & prices to resend back to me and I’ll see what I can do for you. Include where you are located too for shipping estimate!
-405- kick panels
-425- door panels
-450- side cargo or slider panels
-460- DS long panels
-465- rear seat 1/4's panels
-470- rear 1/4's panels by rear hatch
-475- rear hatch panels
-813- ECC Engine compartment ceiling panels
Black part # 33-
Grey part # G33-
Basic full kit (.060" BKP, Door panels, Slider panel, long panel, rear seat 1/4's, rear 1/4's and rear hatch only! Plus extra $'s for other options...)
Black $420
GREY $500
Plus shipping...
Prices for a ’68 – ’79 Bus ABS black panels (includes all fasteners):
STD. Kick panels 33-405-68/70 or 33-405-71/79 .060" thick $45
G33-405-68/70 or G33-405-71/79 .060” $55
HD Kick panels 33-405-68/70HD or 33-405-71/79HD .090" $55
G33-405-68/70HD or G33-405-71/79HD .090" $65
HD Kick Panels with 5 1/4" speaker holes 33-405-68/70HDS or
33-405-71/79HDS .090" $60
G33-405-68/70HDS or G33-405-71/79HDS .090" $70
Door (std.) panels 33-425-68/79 $100
G33-425-68/79 $125
Door panels with lower corner vents 33-425-68/79V $100
G33-425-68/79V $125
Drilled holes for the air ducts arm rests on doors add $10 a pair but you have to figure out the screw attachment.....
Door panels 1975 - 1979 with foam and vinyl arm rests 33-425-75/79 $100
G33-425-75/79 $125
Door panels 1975 - 1979 with foam and vinyl arm rests & vent holes 33-425-75/79V $100
G33-425-75/79V $125
Std seat back bulk head panels (plain pair w/pads) 33-455-P $35
G33-455-P $45
Std seat back bulk head panels (round fresh air holes pair w/pads) 33-455-R $40
G33-455-R $50
Std seat back bulk head panels (rounds plus cig tray hole pair w/pads) 33-455-all $42
G33-455-all $52
Weekender seat back long panel (without pads or sink, EACH) 33-455 $25
G33-455 $35
Slider side door 33-450-68/70 or 33-450-71/79 $65
G33-450-68/70 or G33-450-71/79 $75
NEW: Dbl cab rear wall and door kit 33-451-68/79 $150
G33-451-68/79 $175
Long panel on DS 33-460-68/79 $70
G33-460-68/79 $80
Rear seat ¼’s (pr) 33-465-68/79 $70
G33-465-68/79 $80
Long panel on DS with arm rest holes 33-460-68/79A $75
G33-460-68/79A $85
Rear seat ¼’s (pr) with arm rest holes 33-465-68/79A $75
G33-465-68/79A $85
Rear ¼’s (pr) without spare (non walk thru) 33-470-68/70, 33-470-71 or
33-470-72/79 $40
G33-470-68/70, G33-470-71 or G33-470-72/79 $50
Rear ¼’s (pr) with spare tire (walk thru) 33-470-68/70S, 33-470-71S or
33-470-72/79S $40
G33-470-68/70S, G33-470-71S or G33-470-72/79S $50
Rear Hatch 33-475-64/71V ('64 - '71 Westy with V notch too), 33-475-64/75 or 33-375-76/79 $25
G33-475-64/71V ('64 - '71 Westy with V notch too), G33-475-64/75 or G33-375-76/79 $35
Engine Compartment Ceiling panel kits:
33-813-68/71 Walk thru 1968 - 1971 Bus Engine ceiling panels 2pc w hardware $70
G33-813-68/71 Walk thru 1968 - 1971 Bus Engine ceiling panels 2pc w hardware $80
33-813-73/79 1973 - 1979 Bus Engine ceiling panels W/computer [] hole 3pc w hardware $70
G33-813-73/79 1973 - 1979 Bus Engine ceiling panels W/computer [] hole 3pc w hardware $80
33-813-73/79P 1973 - 1979 Bus Engine ceiling panels W/O computer hole 3pc w hardware $70
G33-813-73/79P 1973 - 1979 Bus Engine ceiling panels W/O computer hole 3pc w hardware $80
Rear seat lower kick panel (plain or cut outs for rear heater) NO mounting holes But comes with a rubber coated clamp kit, the back of the panels are scribe marks for you to drill for the stock clamps (2 rivet holes) or our Rubber clamp kit (single holes) and also for the early 68-70 (?) center V shaped brace. (shipping may not be cheap with the extra long length)
33-468-68/79P Plain with no heater cut outs $40
G33-468-68/79P Plain with no heater cut outs $50
33-468-68/79H With Heater cut outs $45
G33-468-68/79H With Heater cut outs $55
UPS Shipping on each item is posted in Samba ads or on several of the panel’s together average $30 to $60 each (can be up to $120 for full kits to the East coast) within the USA in custom made packaging.
For mailed orders:
USPS Money order or check (held until it clears the bank before shipping the order):
Werksberg Products
7760 E. State Route 69
Suite C5-358
Prescott Valley, AZ 86314
To answer this often asked question on my ABS Interior Panels fastener holes:
All my ABS panels are pre drilled with the mounting holes for the sheet metal screws or molly's fasteners which are included.
BUT every VW factory had different stamping dies (these vehicles are +50 years old and they didn't have CNC or robotics back then...) with holes in slightly different locations and some holes may need minor massaging to line up. The holes are 1/4" and the molly heads are 1/2" so you have plenty of fudge room. Unless Vanagon as the body steel holes are 8mm...
The splits Buses had random drill holes where ever the assemble line wanted to drill the holes. Mine mounting holes are professional space apart. Plus the panels cover up all those ugly old holes...
Even the Bay window latch hole may need trimming as the OEM vs today's made in China are different sizes.
The reason the stock clips are L shaped, it is since the stamped parts holes was not standardized, they can just swing them and slap the panels on during production line assembling.
With most any parts for these old vehicles, most all need some custom fitting. It is called being a mechanic.
_________________
Werksberg Products...products that work!
Paypal: [email protected]
M/O, or check...will be held until they clear before shipping..... In AZ now!
|
|
|
|
