|
|
Additional Photos
Click to load image
L & R arrow keys scroll through photos |
 |
64-67 Pair finished up. |
All apart and clean! |
Nice and clean and 3.5" Lower! |
Dropped on the Left, Stock greasy chit on the Right! |
I also build new Bus Beams! 55-79 starting at $650 |
Fresh early set. |
my '56 Single Cab, My beam and spindles. |
Clean! |
 |
This is what a nice set of old kingpins look like! |
This is what junk Kingpins look like! |
If your cores show up like this, I can't be responsible if shit is missing!! |
Dropped spindles only, with 175/55 15" tires. Thin dogleg. |
Dropped spindles only, drip rail at door handle. |
Stock rebuilds available too! Starting at $150 |
Kingpin bushings replaced if needed! |
|
|
"Flipped" 3.5" Drop spindle service Price: $275
|
Flipped/ dropped spindle service for your 55-67 bus.
Send me your stock spindles, I disassemble and inspect them, clean/blast the components, modify them and re assemble them as 3.5" dropped spindles!
I always take them apart, and send photos of the condition of your spindles before we proceed.
You will need both tie rods to be adjustable. I also usually take 1/2" or so off of each one, for proper alignment adjustment. I can also make a pair of those if you need as well, with or without ends.
* When mailing your cores, please package them tightly and tape the box A LOT. I can't be liable if your box shows up destroyed and your parts are MIA. *
** TAPE UP YOUR THREADS WHEN YOU SEND IN CORES!! **
If you'd like to scrape some of the crud off, please do! I'll be much less likely to forget them in the parts washer for a week....
** I DON'T have these in stock, and must have your cores to build. **
These are modified, NOT cut and welded or any bullshit. I also clearance them in a way that doesn't require the need of gussets and I remove as little as material as possible.
The base price is $275 plus return shipping to you.
That price includes:
- Labor
- Cleaning and inspecting of each piece.
- Modification and clearance.
- primed and painted with black Wurth Satin.
- repositioned and welded kingpin dust cap.
- steering arm clearanced for LinkPin bolt.
- Reamed tie rod holes for flipped tie rods.
- New Nitrile Kingpin seals, no cheap bullshit like the "PROguys" use.
- Polished Kingpins
- Polished bearing surfaces
- New Grade 8 kingpin lock bolt and nut
- Re assembly
I can do them for $250 even, picked up.
This is a basic modify and flip. If your spindles are worn enough to need kingpins I let you know and we go from there. See the photos for samples! If you need kingpins, it will add the cost of the parts plus $100 labor.
You can check the spindles themselves for any lateral movement before removing them, to give you an idea of their condition.
See full details and order here:
http://valleyautowerks-com.3dcartstores.com/_p_19.html
Check my other ads for several other suspension components too!
_________________
[email protected]
Email me.
I spend my time and effort on building quality parts, not selling them to you.
If the ad says shipped, that price is within the continental US only. Please send a zip code or address for a total price elsewhere.
I've been doing nothing but Aircooled suspension, Fabrication and Restoration full time since '04!
*www.ValleyAutoWerks.com *
|
| Advertiser information |
Ad information |
Advertiser:
Name:
Member since:
|
Slowlow 
Sam Manis II
March 17, 2004
|
|
|
|
Location:
Ad placed:
Ad renewed:
Ad last edited:
Views:
Category:
Payments accepted: |
Gate City, Virginia, USA Map it
Tue May 21, 2013 3:18 pm
Mon Nov 03, 2025 9:56 am
Thu Jun 26, 2025 1:06 pm
11828
Parts - Type 2/Bus - 1949-67
Cash
Paypal
Money order/Bank check
Personal check
Credit cards
|
|
|
Watch this ad | 
|
|
Watch this seller |
Share:   
|
|
|
Other ads from Slowlow
See all | See ads in this category
|
Narrowed Linkpin & Balljoint Bus Beams 55-79
|
Full Suspension Services. Stock to dropped.
|
5x205, Wide Five wheel spacers, 3/16"
|
Rust repair, Metal Fab, Floor pans etc!
|
Balljoint camber tool.
|
|
|
|
