|
T1 1950-79 Bolt on Rear Swing Axle Air Ride Kit Price: $1178.10
|
Click below for direct link:
https://limebug.com/product/view/2585/t1-1950-79-bolt-on-rear-swing-axle-air-ride-kit-211
T1 1950-79 Bolt on Rear Swing Axle Air Ride Kit:
T1 & Ghia Rear Swing Axle Air Ride Kit 100% Bolt-on, No welding, No Bodying Off The worlds only fully bolt on rear air ride system that not only allows you to run full air ride while utlising twin bellow 2500lb air bags, and competition gas shocks, but also can be fitted without splitting the shell from the chassis of your beetle/ ghia. The perks of the Titan Engineering rear air T1 Bolt on Air Ride system are:
- Control your ride, simply using our manual paddle valve or V2 digital systems, the kit allows over 7" of travel meaning no problem with steep driveways, speed bumps, cats eyes, potholes, getting on and off a ferry etc.etc
- Titan Six-Point Brace System, our kit utlizes a unique design using the shock towers for lateral loading and using pre-load bars to the gearbox mount along with a cupped mount around the torsion tube housing. This system allows pre-load and left-right and front-back tweaks. This system prevents "creep" and chassis movement by adding strength to the existing structure.
- Lay-it-out, no compromise drop it to the deck design, you may wonder if the design of this kit restricts upper and lower travel, the answer simply is no. This kit will drop the spring plate (if notched or stepped) to bottom out metal-metal on the upper chassis bump stop with the rubber removed. Trust us that is low.
- Save your Fulcrums and Bearings, Commonplace faults with static lowering your vehicle is chewwing up fulcrum plates and wheel bearings from oil starvation. Air ride gives you the ability to adjust the ride height to give you the best of both worlds, slam it for the shows, daily drive it in absolute comfort.
- Bolt on also means Bolt Off, So keep hold of your old parts, if you have enough of the car or want a new one, sell the kit on or transfer it, no need to re-buy.
- Straight out the Box, All kits come Powder Coated in a thick hard wearing Gloss Black, all hardware required to fit to any stock T1 or Ghia is included. The only optional extras we offer are notched spring plates which we do recommend but are not essential in order to fit the kit.
- Simple Installation, the kit can be installed in a day with no issue with moderate experience, and basic tools. Garage fees are reduced significantly. Note: Early vehicles will can supply a kit for early, medium or long axle end casting. If in doubt please call first.
CLICK HERE TO WATCH THE FITTING VIDEO
https://youtu.be/B0IjrIlvM8Y
We ship worldwide, rough pricing below:
UK Mainland: £FREE
Europe: $50.00 Approx
Australia: $220.00 Approx
Norway: $70.00 Approx
North America : $120.00 Approx - Sold for off road use only
US Callers Dial + 441782 922047
_________________
Remember to find everything you need for performance and custom VW's visit us at:
http://www.limebug.com
Performance - Design - Innovation
|
| Advertiser information |
Ad information |
Advertiser:
Name:
Phone:
Member since:
|
lime-bug
Limebug
0044 1782922047
October 25, 2011
|
|
|
|
Location:
Ad placed:
Ad renewed:
Ad last edited:
Views:
Category:
Payments accepted: |
Stoke-on-Trent, United Kingdom, United Kingdom
Wed Oct 08, 2014 6:41 am
Mon Mar 26, 2018 9:00 am
Sun Nov 12, 2017 5:07 pm
13051
Vendors - New Parts - General Parts
Paypal
Money order/Bank check
Credit cards
|
|
|
Watch this ad | 
|
|
Watch this seller |
Share:   
|
|
|
