|
Type 3 "Bullet proof" pedal assemblies Price: $345 Exchange
|
This Ad is for All Type 3, and depending on the year and delivery country the pedals are the same just the throttle set up varies,
Pedal Werks VW Pedal Restoration Services www.PedalWerks.com [email protected] IG @pedalwerksdotcom Facebook PedalWerks.com
pedals are made from stamped steel from the factory and are prone to cracking at the pin hole where the clutch hooks is pressed in, reinforced welding is the only way to prevent this.
I have installed my pedals on cars with stage 3 #3000 clutches. with no failures
United States Postal Money Orders, Personal checks ETC. and PayPal as a gift or +4% accepted
note effective Jan 2024 Sales Tax will be added to all inside California sales. (PW has been covering all sales tax for the last 20 years.
Please verify the year of your pan and that it has not been changed.
these will fit Type 3 from
1962,
Core charges as follows (I DO NOT ACCEPT NON GERMAN PARTS AS CORES)
(Complete pedal assembly $56) (complete with push rod $96)
$465 outright
breakdown is Pedal cluster $25, throttle pedal $12, throttle arm $10, throttle arm pin $4 brake spring $5, clutch hook $16, push rod $40 ($112)
Bad or missing parts will be subtracted from core refund. Example $96 core charge paid. But core received back with aftermarket or unusable clutch hook $80 will be refunded.
I do not use or accept NON GERMAN Pedals as Cores. (Except Brazilian Puma Pedals)
Please check my Feedback
http://www.thesamba.com/vw/forum/viewtopic.php?t=302803&highlight=scott+stuart
This ad is for Rebuilt Pedal Assemblies or Clusters for 1966 thru 1979 VW Bug, Ghia, Thing and type 3, that have been reworked Similar to the article in the April 2008 issue of Hot VW's magazine page 53, and August 2011 page 44.
All work is 100% Guaranteed. I have been a professional Mechanic/Machinist since 1978
I completely disassemble then sandblast and inspect all parts, I only reuse good German parts or use new as required, then I completely "BOX IN" Weld the clutch pedal for Strength,
you will NEVER break your clutch pedal again
The pedal foot pad surface gets rounded corners to improve grip and prolong pad life.
The throttle arm gets straightened and Reinforced & the pin gets threaded and lock nut added to hold roller on and eliminate the C clip.
The throttle pedal gets inspected, repaired and reinforced.
Add a Billet gas pedal for $125
included a Pedal Werks tool steel clutch hook, Classic Bug parts clutch hooks Available for additional cost.
The "Base" and Brake pedal bushings are replaced, then the base gets drilled and a "zerk" fitting is install in the same place as the factory did on Earlier years. Remind your Mechanic to Grease it.
All parts are powder coated semi-Gloss Black, and assembled with grease, brake and clutch pedal "end play" are set and clutch arm is installed using a Grade 8 Bolt and lock nut for safety. new clutch, brake and throttle pedal pads are installed, other finishes are available, including chrome.
Extended width $425 (clutch moved 1.1/8" inch to left)
Extended Brake & Clutch $500 (brake moved 3/4" to the left, clutch moved 1.1/8")
Shipping to the U.S. is $25
Please E-mail,Text or Call me with any Questions,
See my other ads for other years.
Thank You, Scott
_________________
Nothing Exceeds Like Excess!!
www.pedalwerks.com
@pedalwerksdotcom
9zero9-2eight9-nine6five5
12' Golf 2.5
59' Single Cab
57' Oval hard top
55' Oval hardtop
|
| Advertiser information |
Ad information |
Advertiser:
Name:
Member since:
|
PedalWerks
Scott Stuart
January 16, 2005
|
|
|
|
Location:
Ad placed:
Ad renewed:
Ad last edited:
Views:
Category:
Payments accepted: |
San Bernardino, California, USA Map it
Mon Apr 14, 2025 10:16 pm
Thu Dec 11, 2025 7:01 pm
Mon Apr 14, 2025 10:21 pm
111
Parts - Type 3
Cash
Money order/Bank check
|
|
|
Watch this ad | 
|
|
Watch this seller |
Share:   
|
|
|
